Stainless steel high-pressure inline PTSA sensor (0-200ppb). 4-20mA + RS-485, 7-pin.
The Pyxis ST-500SS is an inline PTSA fluorometer built with a stainless steel body for high-pressure service, used to track inhibitor dose in fluorescence-traced water treatment programmes. It measures PTSA tracer concentration across a 0-200ppb range and outputs via 4-20mA analog and RS-485 Modbus through a 7-pin connector.
The Pyxis ST-500SS is an inline PTSA fluorometer built with a stainless steel body for high-pressure service, used to track inhibitor dose in fluorescence-traced water treatment programmes.
It measures PTSA tracer concentration across a 0-200ppb range, giving operators a direct, real-time read on whether treatment chemical dosing is holding at target concentration.
Output is via 4-20mA analog and RS-485 Modbus through a 7-pin connector, supporting integration into plant control systems where the sensor will be exposed to elevated line pressure.
A stainless steel body allows this sensor to be used in high-pressure inline installations where a plastic-bodied unit would not be suitable.
Continuous PTSA fluorescence measurement across a 0-200ppb range gives an accurate read on inhibitor dosing in fluorescence-traced programmes.
4-20mA analog and RS-485 Modbus outputs through a 7-pin connector allow straightforward wiring into a PLC or SCADA system.
The ST-500SS has a stainless steel body specifically built for high-pressure inline service, making it suited to installations where line pressure exceeds what a standard sensor body is rated for.
It measures PTSA tracer concentration across a 0-200ppb range.
Output is via 4-20mA analog and RS-485 Modbus through a 7-pin connector.
The description does not specify a no-tee configuration for this model, distinguishing it from the ST-500-NT variant sold sensor-only.
Inline fluorometer and turbidimeter measuring PTSA (0–500ppb) and turbidity (0–200NTU) with colour and turbidity compensation. UPVC body suited to pressures below 100psi.
Stainless steel monochloramine + pH sensor, 0-5ppm, sensor only with no flow reservoir. Dual 4-20mA + RS-485, 8-pin connector.
Compact dual-channel controller for pH and ORP monitoring with direct pulse output to dosing pumps.
PVDF injection quill with integral non-return valve for safe chemical injection into pressurised pipelines.
Our engineers are ready to evaluate your requirements and recommend the right solution.