Control Technologies · Injecta · Aquarius · Pyxis
Controllers
From single-parameter readouts to Modbus-connected controllers that adapt to almost any probe — single, dual and multiparameter control instruments for water treatment sites across Malaysia.
Multi-Brand Controller Range
Controllers
From One Parameter to Any Parameter
The controller range spans four tiers of capability. Injecta Nexus single-parameter controllers (NX2000, Nexus 6000, Nexus 7000) read one value at a time — pH, ORP, conductivity, chlorine, flow, temperature, turbidity or oxygen. Injecta Nexus dual-parameter controllers (NX2500, Nexus 6500, Nexus 7000 dual) display two parameters simultaneously on a single unit, such as pH/CD or pH/Cl. Aquarius Ultima multiparameter controllers go further, monitoring pH, ORP, conductivity and temperature at once on a 7-inch touchscreen with built-in data logging. And the Pyxis UC series connects over RS485 Modbus RTU to almost any compatible probe — each unit is factory-preconfigured to the specific parameter confirmed at the time of order, so the correct probe type must be specified before shipping. Water treatment sites across Malaysia are matched to the tier that fits their process, from a single pH loop to a fully networked multi-probe system.
Single, dual or multiparameter — choose the read-out that matches your process, from one channel to simultaneous multi-sensor monitoring
RS485 Modbus connectivity — every controller line here reports over Modbus RTU, with Modbus TCP, 4G and WiFi available on select Pyxis models
Guided calibration and alarms — password-protected menus, electrode quality checks and programmable alarm/dosing relay outputs
Data logging and remote access — Aquarius AquaReporter and Injecta Remote platforms bring cloud dashboards, trend charts and SMS/email alerts
4
Controller Categories
Single Parameter
Dual Parameter
Multiparameter
Pyxis (Modbus)
Browse by Parameter Count
All Controllers
4 Categories
Single Parameter Controller
Injecta Nexus Series
NX2000 · Nexus 6000 · Nexus 7000
Reads one parameter at a time — pH, ORP, conductivity, chlorine, flow, temperature, turbidity or oxygen — with guided calibration, alarm relays and RS485 Modbus output.
View Details →
Dual Parameter Controller
Injecta Nexus Series
NX2500 · Nexus 6500 · Nexus 7000 (PH-CL)
Monitors two parameters simultaneously on one display — pH/CD, pH/CL, pH/Rx, pH/OX and more — with independent relay outputs for each channel.
View Details →
Multiparameter Controller
Aquarius Ultima Series
ULTIMA · ULTIMA2P · ULTIMA2P2S · ULTIMA3P
7-inch touchscreen controller reading pH, ORP, conductivity and temperature simultaneously, with 1-minute data logging and AquaReporter remote access.
View Details →
Modbus Multi-Probe Controller
Pyxis UC Series
UC-10 · UC-20 · UC-50 · UC-80 · UC-100
Connects to almost any parameter over RS485 Modbus RTU, auto-adapting to compatible Pyxis probes. Each unit is factory-preconfigured to the parameter confirmed at order — let us know what you're measuring before shipping.
View Details →
Stay Informed
Latest Resources
What Happens When You Run a Boiler Monitoring System Without a Sample Cooler
Every boiler feedwater and steam condensate analyser on the market — including the Pyxis Guardian IK-2000 series — specifies that it must be installed downstream of a sample cooler. This...
Why Cation Conductivity Tells You More Than Standard Conductivity in a Boiler System
Standard conductivity measurement is one of the most common parameters in boiler feedwater and steam condensate monitoring. It is fast, inexpensive, and gives a useful general indication of total dissolved...
On/Off, Proportional, PID, and Fuzzy Logic Control: How Each One Behaves in the Real World
Every dosing pump, bleed valve, or injector in a water treatment system runs on one of four control strategies: on/off, proportional, PID, or fuzzy logic. Most operators never choose one...
The Consequences of Running a Cooling Tower Above Its Maximum Cycles of Concentration
Cycles of concentration is one of the most important parameters in cooling tower operation. It determines how much mineral content builds up in the circulating water relative to the makeup...
Why Conductivity Alone Is Not Enough to Control a Cooling Tower
Conductivity control is the foundation of every cooling tower water treatment programme. It keeps dissolved solids from concentrating to the point of scale formation, and it triggers the bleed-and-dose cycle...
Malaysia's Controller & Instrumentation Partner
One parameter or many — tell us what you're measuring.
Speak to our engineers about which controller tier fits your process, and which parameters to preconfigure before we ship.