Standard conductivity measurement is one of the most common parameters in boiler feedwater and steam condensate monitoring. It is fast, inexpensive, and gives a useful general indication of total dissolved...
Pyxis Panel Analyser Range
Analysers
Continuous Monitoring, Panel-Mounted and Ready to Install
Where a controller reads a single probe, an analyser is a complete turn-key monitoring panel — smart sensors, flow control, data logging and display engineered together for one application. The Pyxis IK-1500 series panelises pH, conductivity, turbidity and glycol monitoring for AI/HPC data centre coolant distribution loops. The Guardian series covers industrial cooling water and boiler feedwater with auto-brushing chlorine sensors or modular plug-and-play smart sensors that expand over time. The IK-73X-PLUS series is a dedicated auto-brushing turbidity analyser down to 0.002 NTU resolution. And the Titronex MFA series replaces conventional peristaltic-pump wet chemistry with pump-free colorimetric cartridges for hardness, chlorine, phosphate and polymer. Every analyser here is built around Pyxis Lab smart sensor technology for accurate, low-maintenance, continuous readings.
Turn-key panel design — sensors, flow tee, data logger and display pre-engineered and factory-tested as one unit, not assembled on site
Auto-brushing and pump-free options — mechanical self-cleaning electrodes or cartridge-based colorimetry cut routine maintenance versus conventional analysers
4-20mA and RS-485 Modbus outputs — integrates directly with PLCs, BMS, DCIM or EPMS platforms already on site
Application-matched sensor sets — cooling water, boiler feedwater, data centre cooling and colorimetric chemistry each have a purpose-built panel
Browse by Application
All Analysers
Data Centre Cooling Analyzer
Pyxis IK-1500 Series
IK-1500 · IK-1500A
Panelised smart sensor monitoring for AI/HPC data centre CDU coolant loops — pH, temperature, conductivity, turbidity and glycol concentration simultaneously, with 4-20mA and RS-485 Modbus outputs for BMS/DCIM integration.
Multiparameter Analyzer Panel
Pyxis Guardian Series
IK-203X (Cooling Water) · IK-2000 (Boiler Feedwater)
Turn-key panels for corrosion, deposition and microbiological control. IK-203X auto-brushes chlorine/pH/ORP for cooling towers; IK-2000 adds DO, sulfite, conductivity and TDS sensors for boiler feedwater — expandable without reconfiguration.
Single Parameter Turbidity Analyzer
Pyxis IK-73X-PLUS Series
LT-739 (0-40 NTU) · LT-736 (0-1,000 NTU)
Auto-brushing inline turbidity analyzer with 0.002 NTU resolution, motorized flow regulating valve and touchscreen data logging — for drinking, cooling, process and wastewater effluent applications.
Colorimetric Wet-Chemistry Analyzer
Pyxis Titronex™ MFA Series
MFA-100 · MFA-310 · MFA-400 · MFA-600
Pump-free colorimetric analyzers running directly off pressurized sample flow with sealed disposable reagent cartridges — chlorine, orthophosphate, dispersant polymer and ultra-low hardness, with less maintenance than pump-driven analyzers.
Stay Informed
Latest Resources
Conductivity vs. Fluorescence for Sugar Leak Detection in Boiler Condensate
Sugar mills have relied on hourly manual condensate sampling for decades, precisely because a sugar leak into boiler condensate is expensive and dangerous to leave undetected. The problem is that...
Why Real-Time Boiler Water Quality Monitoring Is Not Optional — Conductivity, pH, Dissolved Oxygen, and Hardness Explained
A boiler that runs on poor-quality feedwater does not announce the problem immediately. The damage accumulates quietly — inside heat transfer surfaces, in the steam distribution system, at turbine blades...
What Happens When You Run a Boiler Monitoring System Without a Sample Cooler
Every boiler feedwater and steam condensate analyser on the market — including the Pyxis Guardian IK-2000 series — specifies that it must be installed downstream of a sample cooler. This...