Pyxis HW-201-T Inline Drop-In Sugar Thin Juice Fluorometer (requires ST-007 Tee)
Drop-in design stainless steel sugar thin juice fluorometer (0-500ppm). Requires ST-007 stainless tee (sold separately). 4-20mA + RS-485, 7-pin.
Pyxis HW-201-T Inline Drop-In Sugar Thin Juice Fluorometer (requires ST-007 Tee)
The Pyxis HW-201-T is a drop-in inline fluorometer for sugar thin juice process monitoring, covering a 0-500ppm range. It must be installed with the separately sold ST-007 stainless tee, and it outputs via both 4-20mA analog and RS-485 Modbus through a single 7-pin connector for continuous inline monitoring.
Description
The Pyxis HW-201-T is a drop-in inline fluorometer for sugar thin juice process monitoring, covering the same 0-500ppm range as the standard HW-201. Rather than integrating its own process connection, it is designed to mount directly into the separately sold ST-007 stainless tee, simplifying installation into existing piping.
Once installed, the HW-201-T outputs via both 4-20mA analog and RS-485 Modbus communication through a single 7-pin connector, allowing it to connect to analog control panels or networked PLC/SCADA systems used in refinery process control.
This drop-in approach is intended for facilities that want continuous inline thin juice monitoring with a simplified mounting arrangement, provided the ST-007 tee is ordered alongside the sensor.
Why Use This
Simplified Drop-In Installation
The drop-in design mounts directly into the ST-007 stainless tee (sold separately), streamlining installation into existing thin juice piping.
Continuous Thin Juice Process Monitoring
Covering 0-500ppm, the HW-201-T gives sugar refining operations a continuous inline read on thin juice concentration for process control.
Applications
- Sugar thin juice concentration monitoring via simplified drop-in installation
- Continuous inline process monitoring in sugar refining operations
FAQ
What does the HW-201-T measure?
It measures sugar thin juice concentration over a 0-500ppm range, the same as the standard HW-201.
Does this sensor need any additional hardware to install?
Yes — the HW-201-T is a drop-in design that must be installed with the ST-007 stainless tee, which is sold separately.
What outputs does it provide?
4-20mA analog and RS-485 Modbus outputs, through a single 7-pin connector.
What is the benefit of the drop-in design over the standard HW-201?
Mounting into the ST-007 tee simplifies inline installation compared to a fixed process connection, while providing the same continuous thin juice monitoring.
Resources
Related Products
Inline fluorometer and turbidimeter measuring PTSA (0–500ppb) and turbidity (0–200NTU) with colour and turbidity compensation. UPVC body suited to pressures below 100psi.
Stainless steel inline PTSA sensor built to drop directly into WALCHEM and other industry-standard tee assemblies. Measures PTSA 0–300ppb with colour and turbidity compensation, no plumbing modification needed.
Compact dual-channel controller for pH and ORP monitoring with direct pulse output to dosing pumps.
PVDF injection quill with integral non-return valve for safe chemical injection into pressurised pipelines.
Other Models in This Line
Latest Resources
Need help with selection or sizing?
Our engineers are ready to evaluate your requirements and recommend the right solution.