Pyxis ST-500-NT Inline PTSA Sensor (No Tee Assembly)
Inline PTSA sensor (0-200ppb), sensor only, no tee assembly kit included. 4-20mA + RS-485, 7-pin.
Pyxis ST-500-NT Inline PTSA Sensor (No Tee Assembly)
The Pyxis ST-500-NT is an inline PTSA fluorometer used to track inhibitor dose in fluorescence-traced water treatment programmes, with a measurement range of 0-200ppb. It ships as a sensor only, without the tee assembly kit, for sites that already have compatible tee hardware installed. Output is via 4-20mA analog and RS-485 Modbus through a 7-pin connector for integration with plant control systems.
Description
The Pyxis ST-500-NT is an inline PTSA fluorometer used to track inhibitor dose in fluorescence-traced water treatment programmes, with a measurement range of 0-200ppb.
It ships as a sensor only, without the tee assembly kit, making it the right choice for sites that already have compatible tee hardware installed and simply need a replacement or additional sensor.
Output is via 4-20mA analog and RS-485 Modbus through a 7-pin connector, allowing straightforward integration with existing plant control systems for continuous inhibitor dose verification.
Why Use This
Real-Time Inhibitor Tracking
The PTSA fluorometer continuously measures tracer concentration from 0-200ppb, giving an accurate, real-time read on inhibitor dosing in fluorescence-traced programmes.
Cost-Effective for Existing Installations
Supplied as a sensor only, it lets sites with an existing tee assembly add or replace a sensor without purchasing a full mounting kit.
Simple Control Integration
4-20mA analog and RS-485 Modbus outputs through a 7-pin connector allow straightforward wiring into a PLC or SCADA system.
Applications
- Cooling water inhibitor dose verification — fluorescence tracing confirms treatment chemical is reaching target concentration
- Sites with existing tee hardware — sensor-only format avoids paying for a duplicate tee assembly
- PLC/SCADA-integrated dosing control — 4-20mA and Modbus outputs support automated dose adjustment
FAQ
Does this sensor come with a tee assembly for installation?
No. The ST-500-NT is sold as a sensor only, without the tee assembly kit, for sites that already have compatible tee hardware installed.
What is the measurement range of this sensor?
It measures PTSA tracer concentration across a 0-200ppb range.
How does the sensor output connect to my control system?
It outputs via 4-20mA analog and RS-485 Modbus through a 7-pin connector for integration with plant control systems.
What is this sensor used for?
It tracks inhibitor dose in fluorescence-traced water treatment programmes by measuring PTSA tracer concentration in the water.
Resources
Related Products
Inline conductivity sensor rated for high temperature and high pressure service, suited to boiler feedwater and steam condensate monitoring.
Stainless steel ozone + pH sensor, 0-2ppm, sensor only with no flow reservoir. Dual 4-20mA + RS-485, 8-pin connector.
Compact dual-channel controller for pH and ORP monitoring with direct pulse output to dosing pumps.
PVDF injection quill with integral non-return valve for safe chemical injection into pressurised pipelines.
Other Models in This Line
Latest Resources
Need help with selection or sizing?
Our engineers are ready to evaluate your requirements and recommend the right solution.