Pyxis CR-300-BSP Wired LPR Corrosion Sensor (1-inch BSPT)
Wired LPR corrosion sensor, 1-inch BSPT, 24V/2W powered. 4-20mA + RS-485 out, 8-pin.
Pyxis CR-300-BSP Wired LPR Corrosion Sensor (1-inch BSPT)
The Pyxis CR-300-BSP is a wired Linear Polarization Resistance (LPR) sensor for real-time corrosion rate monitoring in cooling water and process systems. It installs via a 1-inch BSPT thread, runs on 24V/2W power, and outputs data via 4-20mA analog and RS-485 through an 8-pin connector.
Description
The Pyxis CR-300-BSP is a wired Linear Polarization Resistance (LPR) corrosion sensor for real-time corrosion rate monitoring in cooling water and process systems. It installs via a 1-inch BSPT threaded connection, suiting facilities and regions that standardize on BSPT fittings rather than NPT.
The sensor runs on 24V/2W power and outputs corrosion rate data via both 4-20mA analog and RS-485 through an 8-pin connector, allowing integration with existing plant monitoring and control infrastructure.
It is suited to facilities that want a permanently wired, continuously powered corrosion monitoring point on cooling water or process piping using BSPT threaded fittings.
Why Use This
Real-Time Corrosion Monitoring
LPR sensing provides continuous corrosion rate data for cooling water and process systems.
Straightforward Installation
A 1-inch BSPT thread allows direct mounting into standard piping.
Applications
- Cooling water systems — continuous, wired corrosion rate monitoring
- Process piping systems using BSPT fittings — permanent installation via 1-inch BSPT threaded connection
FAQ
How does the CR-300-BSP connect to piping?
It installs via a 1-inch BSPT threaded connection, fitting standard BSPT piping fittings.
What are the power requirements?
The CR-300-BSP runs on 24V/2W power.
What does the CR-300-BSP measure and how is data output?
It measures real-time corrosion rate using Linear Polarization Resistance (LPR) technology, with output via 4-20mA analog and RS-485 through an 8-pin connector.
Resources
Related Products
Stainless steel bromine + pH sensor, 0-5ppm, sensor only with no flow reservoir. Dual 4-20mA + RS-485, 8-pin connector.
Inline digital refractometer measuring refractive index, %BRIX, and both mono-ethylene and mono-propylene glycol concentration in one sensor. Suited to closed-loop glycol systems, sugar process monitoring, and data centre cooling loops.
Compact dual-channel controller for pH and ORP monitoring with direct pulse output to dosing pumps.
PVDF injection quill with integral non-return valve for safe chemical injection into pressurised pipelines.
Other Models in This Line
Latest Resources
Need help with selection or sizing?
Our engineers are ready to evaluate your requirements and recommend the right solution.