Inline turbidimeter, high range (0-1,000NTU). 4-20mA + RS-485, 7-pin.
The Pyxis ST-730B is a high-range inline turbidimeter for monitoring process and treated water clarity, covering 0-1,000NTU. It mounts directly in the process line and outputs both 4-20mA analog and RS-485 Modbus signals via a 7-pin connector for integration into control systems.
The Pyxis ST-730B is a high-range inline turbidimeter for monitoring process and treated water clarity, covering 0-1,000NTU — ten times the range of the standard ST-730. It’s suited to streams with higher turbidity levels where the standard range would be insufficient.
It mounts directly in the process line for continuous readings and outputs both 4-20mA analog and RS-485 Modbus signals via a 7-pin connector for integration into control systems.
This makes it a fit for raw water intake, pre-treatment stages, or other higher-turbidity monitoring points ahead of clarification or filtration.
Measures turbidity up to 1,000NTU, suited to process water with higher particulate content than standard-range sensors can handle.
4-20mA analog and RS-485 Modbus outputs ease integration with control systems.
0-1,000NTU, a high-range variant suited to higher-turbidity process water.
It mounts directly in the process line for continuous inline readings.
4-20mA analog and RS-485 Modbus signals, via a 7-pin connector.
Stainless steel inline PTSA sensor built to drop directly into WALCHEM and other industry-standard tee assemblies. Measures PTSA 0–300ppb with colour and turbidity compensation, no plumbing modification needed.
Inline digital refractometer measuring refractive index, %BRIX, and both mono-ethylene and mono-propylene glycol concentration in one sensor. Suited to closed-loop glycol systems, sugar process monitoring, and data centre cooling loops.
Compact dual-channel controller for pH and ORP monitoring with direct pulse output to dosing pumps.
PVDF injection quill with integral non-return valve for safe chemical injection into pressurised pipelines.
Our engineers are ready to evaluate your requirements and recommend the right solution.