Pyxis ST-710 Inline pH Analyser
Inline pH analyser (0-14). 4-20mA + RS-485, 7-pin.
Pyxis ST-710 Inline pH Analyser
The Pyxis ST-710 is an inline pH analyser for process and treatment water monitoring, covering the full 0-14 pH range. It outputs via both 4-20mA analog and RS-485 Modbus through a single 7-pin connector, allowing direct integration into existing water treatment control systems.
Description
The Pyxis ST-710 is an inline pH analyser designed for process and treatment water monitoring, covering the full 0-14 pH range. It is built for continuous, in-line measurement rather than periodic manual sampling, giving operators ongoing visibility into pH conditions across their process.
The analyser outputs via both 4-20mA analog and RS-485 Modbus communication through a single 7-pin connector, allowing it to integrate directly with existing analog control loops or networked PLC/SCADA systems.
Its full-range coverage and dual output design make the ST-710 a straightforward fit for water treatment operations that need to fold pH monitoring into an existing control architecture without extensive rewiring.
Why Use This
Full-Range Process pH Monitoring
Covering the complete 0-14 range, the ST-710 gives treatment plants continuous, accurate pH readings across the entire process range.
Flexible System Integration
4-20mA analog output combined with RS-485 Modbus lets the sensor communicate with both analog controllers and networked control systems through one 7-pin connector.
Applications
- Process water pH monitoring in industrial water treatment systems
- Treatment water quality monitoring for ongoing process control
- PLC/SCADA integration for automated pH-based control loops
FAQ
What range of pH does the ST-710 measure?
It covers the full 0-14 pH range.
What is this analyser used for?
It is designed for process and treatment water monitoring.
What outputs does it provide for control system integration?
Dual output via 4-20mA analog and RS-485 Modbus, delivered through a single 7-pin connector.
Can it integrate with an existing water treatment control system?
Yes, the combined analog and Modbus outputs allow direct integration into existing water treatment control systems.
Resources
Related Products
Inline fluorometer and turbidimeter measuring PTSA (0–500ppb) and turbidity (0–200NTU) with colour and turbidity compensation. UPVC body suited to pressures below 100psi.
Inline digital refractometer measuring refractive index, %BRIX, and both mono-ethylene and mono-propylene glycol concentration in one sensor. Suited to closed-loop glycol systems, sugar process monitoring, and data centre cooling loops.
Compact dual-channel controller for pH and ORP monitoring with direct pulse output to dosing pumps.
PVDF injection quill with integral non-return valve for safe chemical injection into pressurised pipelines.
Other Models in This Line
Latest Resources
Need help with selection or sizing?
Our engineers are ready to evaluate your requirements and recommend the right solution.