Pyxis ST-588-NT Inline PTSA + Fluorescent Polymer Sensor (No Tee Assembly)
Inline PTSA + fluorescent tagged-polymer sensor (0-200ppb / 0-20ppm), sensor only, no tee kit. Dual 4-20mA + RS-485, 8-pin.
Pyxis ST-588-NT Inline PTSA + Fluorescent Polymer Sensor (No Tee Assembly)
The Pyxis ST-588-NT is an inline dual-parameter sensor that measures PTSA and fluorescent tagged polymer together in a single probe, across a 0-200ppb / 0-20ppm range. It ships as a sensor only, without the tee assembly kit, and outputs dual 4-20mA analog and RS-485 Modbus signals through an 8-pin connector.
Description
The Pyxis ST-588-NT is an inline dual-parameter sensor that measures PTSA and fluorescent tagged polymer together in a single probe, across a 0-200ppb / 0-20ppm range.
It ships as a sensor only, without the tee assembly kit, suiting sites that already have compatible tee hardware installed and need a replacement or additional sensor.
Output is dual 4-20mA analog and RS-485 Modbus through an 8-pin connector, for integration with plant control systems.
Why Use This
Two Tracers, One Probe
Measuring PTSA and fluorescent tagged polymer together reduces the number of insertion points needed on the process line.
Cost-Effective for Existing Installations
Supplied as a sensor only, it lets sites with an existing tee assembly add or replace a sensor without purchasing a full mounting kit.
Standard Control Integration
Dual 4-20mA analog and RS-485 Modbus outputs through an 8-pin connector allow straightforward wiring into a PLC or SCADA system.
Applications
- Sites with existing tee hardware needing a sensor-only replacement
- Combined PTSA and tagged-polymer dosing verification
- PLC/SCADA-integrated dual-parameter monitoring
FAQ
Does this version include the tee assembly?
No, the ST-588-NT ships as a sensor only, without the tee assembly kit.
What does it measure?
It measures PTSA and fluorescent tagged polymer together in a single probe, across a 0-200ppb / 0-20ppm range.
How does it connect to a control system?
Output is dual 4-20mA analog and RS-485 Modbus through an 8-pin connector.
What treatment programmes is it suited to?
It suits combined inhibitor and tagged-polymer dosing programmes.
Resources
Related Products
Inline fluorometer and turbidimeter measuring PTSA (0–500ppb) and turbidity (0–200NTU) with colour and turbidity compensation. UPVC body suited to pressures below 100psi.
Stainless steel ozone + pH sensor, 0-2ppm, sensor only with no flow reservoir. Dual 4-20mA + RS-485, 8-pin connector.
Compact dual-channel controller for pH and ORP monitoring with direct pulse output to dosing pumps.
PVDF injection quill with integral non-return valve for safe chemical injection into pressurised pipelines.
Other Models in This Line
Latest Resources
Need help with selection or sizing?
Our engineers are ready to evaluate your requirements and recommend the right solution.