Pyxis ST-726 Inline Conductivity + Temperature Analyser (High Range)
Inline conductivity + temperature analyser, high range (10-300,000uS/cm). Dual 4-20mA + RS-485, 8-pin.
Pyxis ST-726 Inline Conductivity + Temperature Analyser (High Range)
The Pyxis ST-726 is an inline conductivity and temperature analyser built as a high-range variant, covering 10-300,000uS/cm for higher-conductivity process streams. It reports conductivity and temperature from a single sensor, with dual 4-20mA analog outputs plus RS-485 Modbus via an 8-pin connector.
Description
The Pyxis ST-726 is an inline conductivity and temperature analyser built as a high-range variant, covering 10-300,000uS/cm. It’s intended for higher-conductivity process streams where standard-range sensors would be pushed beyond their measurement ceiling.
It reports conductivity and temperature from a single sensor, simplifying installation for streams where both readings are needed.
Dual 4-20mA analog outputs plus RS-485 Modbus via an 8-pin connector allow direct integration into existing process control systems.
Why Use This
Extended Range Coverage
Measures conductivity up to 300,000uS/cm, suited to higher-conductivity process water that would exceed standard-range sensors.
Combined Measurement
Reports conductivity and temperature from a single inline sensor.
Flexible System Integration
Dual 4-20mA outputs and RS-485 Modbus ease integration with existing systems.
Applications
- High-conductivity process stream monitoring — for streams beyond the range of standard conductivity sensors
- Brine and concentrate monitoring — tracking conductivity in higher-strength process water
- Industrial wastewater and concentrate lines — monitoring conductivity in higher-conductivity discharge streams
FAQ
What conductivity range does the ST-726 cover?
It covers 10-300,000uS/cm, a high-range variant suited to higher-conductivity process streams.
Does it also track temperature?
Yes, conductivity and temperature are both reported from a single inline sensor.
How does it connect to plant controls?
Via dual 4-20mA analog outputs plus RS-485 Modbus, through an 8-pin connector.
Resources
Related Products
Stainless steel ozone + pH sensor, 0-2ppm, sensor only with no flow reservoir. Dual 4-20mA + RS-485, 8-pin connector.
Stainless steel free chlorine + pH sensor, 0-5ppm, sensor only with no flow reservoir. Dual 4-20mA + RS-485, 8-pin connector.
Compact dual-channel controller for pH and ORP monitoring with direct pulse output to dosing pumps.
PVDF injection quill with integral non-return valve for safe chemical injection into pressurised pipelines.
Other Models in This Line
Latest Resources
Need help with selection or sizing?
Our engineers are ready to evaluate your requirements and recommend the right solution.