Pyxis ST-711 Inline ORP Analyser
Inline ORP analyser (+1,500mV). 4-20mA + RS-485, 7-pin.
Pyxis ST-711 Inline ORP Analyser
The Pyxis ST-711 is an inline ORP analyser for process and treatment water monitoring, covering a range of +1,500mV. It outputs via both 4-20mA analog and RS-485 Modbus through a single 7-pin connector, allowing direct integration into existing water treatment control systems.
Description
The Pyxis ST-711 is an inline ORP (oxidation-reduction potential) analyser for process and treatment water monitoring, covering a range of up to +1,500mV. It provides continuous inline ORP measurement, giving operators an ongoing indicator of oxidizing or reducing conditions in their water treatment process.
The analyser outputs via both 4-20mA analog and RS-485 Modbus communication through a single 7-pin connector, so it can connect to analog control loops or networked PLC/SCADA systems already in place.
With its wide ORP range and dual output design, the ST-711 is suited to water treatment operations that need to monitor oxidation-reduction conditions as part of an existing control system.
Why Use This
Reliable ORP Monitoring
Covering up to +1,500mV, the ST-711 gives treatment plants a continuous read on oxidation-reduction potential to track disinfection effectiveness.
Flexible System Integration
4-20mA analog output combined with RS-485 Modbus lets the sensor communicate with both analog controllers and networked control systems through one 7-pin connector.
Applications
- ORP monitoring in process water treatment systems
- Treatment water oxidation-reduction monitoring for process control
- PLC/SCADA integration for automated ORP-based control loops
FAQ
What does the ST-711 measure?
It measures oxidation-reduction potential (ORP) up to +1,500mV.
What applications is it used for?
Process and treatment water monitoring.
What outputs are available?
4-20mA analog and RS-485 Modbus outputs, through a single 7-pin connector.
Can it integrate with existing water treatment control systems?
Yes, the dual analog/Modbus output design allows direct integration into existing water treatment control systems.
Resources
Related Products
Stainless steel bromine + pH sensor, 0-5ppm, sensor only with no flow reservoir. Dual 4-20mA + RS-485, 8-pin connector.
Real-time inline PTSA sensor for tracking inhibitor dose in cooling and boiler water treatment programmes. Measures PTSA using fluorescence technology across 0–300ppb with automatic colour and turbidity compensation, holding accuracy even in samples with iron contamination or elevated turbidity.
Compact dual-channel controller for pH and ORP monitoring with direct pulse output to dosing pumps.
PVDF injection quill with integral non-return valve for safe chemical injection into pressurised pipelines.
Other Models in This Line
Latest Resources
Need help with selection or sizing?
Our engineers are ready to evaluate your requirements and recommend the right solution.