Skip to main content

Autoflo Technology

Pyxis ST-500RO Inline PTSA Sensor for Reverse Osmosis

Inline PTSA sensor for RO systems (0-40ppb). 4-20mA + RS-485, 7-pin.

Pyxis
PTSA Fluorometer
Inline Sensors Line

Pyxis ST-500RO Inline PTSA Sensor for Reverse Osmosis

Model:
ST-500RO
Brand:
Pyxis

The Pyxis ST-500RO is an inline PTSA fluorometer designed for reverse osmosis antiscalant tracer dosing applications, measuring inhibitor concentration across a 0-40ppb range. It tracks inhibitor dose in fluorescence-traced water treatment programmes and outputs via 4-20mA analog and RS-485 Modbus through a 7-pin connector.

RO-specific calibration — 0-40ppb range matched to reverse osmosis antiscalant tracer dosing
Standard control integration — 4-20mA analog and RS-485 Modbus outputs via a 7-pin connector
RO-specific calibration — 0-40ppb range matched to reverse osmosis antiscalant tracer dosing

Description

The Pyxis ST-500RO is an inline PTSA fluorometer purpose-built for reverse osmosis antiscalant tracer dosing applications, measuring inhibitor concentration across a 0-40ppb range.

This narrower, RO-matched range gives operators of RO plants a precise, real-time check that antiscalant dosing is tracking correctly ahead of the membranes, helping protect against scale formation.

It tracks inhibitor dose in fluorescence-traced water treatment programmes and outputs via 4-20mA analog and RS-485 Modbus through a 7-pin connector for integration with plant control systems.

Why Use This

Purpose-Built for RO Systems

The 0-40ppb range is calibrated for reverse osmosis antiscalant tracer dosing rather than general cooling water programmes.

Real-Time Dose Verification

Continuous PTSA fluorescence measurement confirms antiscalant tracer concentration is being maintained at the target dose.

Simple Control Integration

4-20mA analog and RS-485 Modbus outputs through a 7-pin connector allow straightforward wiring into a PLC or SCADA system.

Applications

  • Reverse osmosis antiscalant tracer dosing — confirms dosing is reaching target ahead of RO membranes
  • Scale prevention monitoring in RO pretreatment
  • PLC/SCADA-integrated dose control on RO trains

FAQ

What water treatment application is this sensor designed for?

The ST-500RO is designed for reverse osmosis antiscalant tracer dosing applications.

Why is the measurement range narrower than other PTSA sensors in the range?

The 0-40ppb range is matched to typical RO antiscalant dosing levels, which are lower than the general inhibitor dosing programmes other ST-500 variants cover.

How does it output measurements to plant controls?

Output is via 4-20mA analog and RS-485 Modbus through a 7-pin connector.

Is this sensor suitable for sea water RO systems?

This standard version is intended for general RO service; the ST-500RO-Ti variant with a titanium solution ground is the option built specifically for sea water RO systems.

Download

D25 Product Datasheet
PDF · 1.2 MB
Installation Manual
PDF · 0.8 MB

Resources

How to Size a Chemical Dosing Pump for Water Treatment
Technical Article · 8 min read
Understanding Water-Powered vs Electric Dosing Pumps
Technical Article · 6 min read
Poultry Medication Dosing — Case Study
Case Study · Selangor Poultry Farm
You May Also Need

Related Products

Pyxis ST-765P-O3 Ozone + pH Sensor (CPVC)

CPVC oxidizer + pH + temperature sensor measuring Ozone 0.00-2.00ppm with pH compensation to pH 9.0. Replaceable front-loading reference electrode, Bluetooth-ready with MA-CR adapter.

Pyxis ST-500 Inline PTSA Sensor

Real-time inline PTSA sensor for tracking inhibitor dose in cooling and boiler water treatment programmes. Measures PTSA using fluorescence technology across 0–300ppb with automatic colour and turbidity compensation, holding accuracy even in samples with iron contamination or elevated turbidity.

Controllers
Pyxis pH / ORP Controller

Compact dual-channel controller for pH and ORP monitoring with direct pulse output to dosing pumps.

Accessories
Injection Quill & Check Valve

PVDF injection quill with integral non-return valve for safe chemical injection into pressurised pipelines.

Animal Line

Other Models in This Line

Pyxis ST-500RO Inline PTSA Sensor for Reverse Osmosis
Explore Range
Stay Informed

Latest Resources

Initiate a Project

Need help with selection or sizing?

Our engineers are ready to evaluate your requirements and recommend the right solution.