Stainless steel high-pressure inline oil-in-water fluorometer, mid range (0-100ppm). 4-20mA + RS-485, 7-pin.

The Pyxis HM-520SS is a mid-range inline oil-in-water fluorometer built with a stainless steel body for high-pressure service, designed for produced water, wastewater discharge compliance, and process water monitoring. It covers 0-100ppm and outputs via both 4-20mA analog and RS-485 Modbus through a single 7-pin connector.
The Pyxis HM-520SS is a mid-range inline oil-in-water fluorometer built with a stainless steel body for high-pressure service, designed for produced water, wastewater discharge compliance, and process water monitoring. It covers a 0-100ppm range using fluorometric detection, matching the standard HM-520’s range in a construction rated for high-pressure conditions.
The stainless steel housing allows this sensor to be installed in higher-pressure process lines than a standard-body unit could handle, while maintaining the same mid-range measurement capability.
It outputs via both 4-20mA analog and RS-485 Modbus communication through a single 7-pin connector, integrating with either analog control loops or networked PLC/SCADA systems.
The stainless steel body lets the HM-520SS operate reliably in high-pressure process lines where standard-bodied sensors are not rated.
Covering 0-100ppm, the HM-520SS fits oil-in-water monitoring applications that fall between standard low-range and high-range sensor coverage.
It covers a mid-range of 0-100ppm oil-in-water concentration.
The stainless steel body is built for high-pressure service, suiting installations beyond the capability of a standard-body sensor.
4-20mA analog and RS-485 Modbus outputs, delivered through a single 7-pin connector.
Produced water, wastewater discharge compliance, and process water monitoring in mid-range, high-pressure conditions.
High-temperature inline digital refractometer measuring refractive index, %BRIX, and glycol concentration up to 120°C. Stainless steel Tri-Clamp body, IP67, built-in Bluetooth 5.0.
Real-time inline PTSA sensor for tracking inhibitor dose in cooling and boiler water treatment programmes. Measures PTSA using fluorescence technology across 0–300ppb with automatic colour and turbidity compensation, holding accuracy even in samples with iron contamination or elevated turbidity.
Compact dual-channel controller for pH and ORP monitoring with direct pulse output to dosing pumps.
PVDF injection quill with integral non-return valve for safe chemical injection into pressurised pipelines.
Our engineers are ready to evaluate your requirements and recommend the right solution.