Pyxis HM-510SS Inline Stainless Steel Oil In Water Fluorometer (High Range, High Pressure)
Stainless steel high-pressure inline oil-in-water fluorometer, high range (0-1,000ppm). 4-20mA + RS-485, 7-pin.
Pyxis HM-510SS Inline Stainless Steel Oil In Water Fluorometer (High Range, High Pressure)
The Pyxis HM-510SS is a high-range inline oil-in-water fluorometer built with a stainless steel body for high-pressure service, designed for produced water, wastewater discharge compliance, and process water monitoring. It covers 0-1,000ppm and outputs via both 4-20mA analog and RS-485 Modbus through a single 7-pin connector.
Description
The Pyxis HM-510SS is a high-range inline oil-in-water fluorometer built with a stainless steel body for high-pressure service, designed for produced water, wastewater discharge compliance, and process water monitoring. It covers a 0-1,000ppm range using fluorometric detection, combining high-range measurement with construction suited to demanding pressure conditions.
The stainless steel housing lets the HM-510SS operate in high-pressure installations where a standard-body sensor would not be appropriate, while its fluorometric detection tracks oil-in-water concentration across the full high range.
It outputs via both 4-20mA analog and RS-485 Modbus communication through a single 7-pin connector, enabling integration with analog control loops or networked PLC/SCADA systems.
Why Use This
Built for High-Pressure Service
The stainless steel body lets the HM-510SS operate reliably in high-pressure process lines where standard-bodied sensors are not rated.
Monitoring at Higher Oil Concentrations
The 0-1,000ppm high-range span lets the HM-510SS track oil-in-water levels in streams where concentrations exceed standard low-range sensor limits.
Applications
- High-pressure produced water monitoring with elevated oil content
- Wastewater discharge compliance monitoring in high-pressure, high-concentration streams
- Process water monitoring in demanding pressure conditions
FAQ
What range does the HM-510SS cover?
It covers a high range of 0-1,000ppm oil-in-water concentration.
Why choose the stainless steel variant?
The stainless steel body is built for high-pressure service, suiting installations that exceed what a standard-body sensor can withstand.
What outputs and connections does it provide?
4-20mA analog and RS-485 Modbus outputs, through a single 7-pin connector.
What applications is it designed for?
Produced water, wastewater discharge compliance, and process water monitoring in high-pressure, high-concentration installations.
Resources
Related Products
Inline conductivity sensor rated for high temperature and high pressure service, suited to boiler feedwater and steam condensate monitoring.
Stainless steel ozone + pH sensor, 0-2ppm, sensor only with no flow reservoir. Dual 4-20mA + RS-485, 8-pin connector.
Compact dual-channel controller for pH and ORP monitoring with direct pulse output to dosing pumps.
PVDF injection quill with integral non-return valve for safe chemical injection into pressurised pipelines.
Other Models in This Line
Latest Resources
Need help with selection or sizing?
Our engineers are ready to evaluate your requirements and recommend the right solution.