Chemical compatibility charts give you a starting point. They do not tell you whether your specific system will fail. The chart says EPDM is compatible with 30% sulphuric acid —...





Pumps and flow equipment for chemical transfer, process circulation, water conditioning, and sample handling applications.
Autoflo Technology distributes a range of flow technologies including AODD pumps, centrifugal pumps, peristaltic pumps, magnetic flow conditioners, and boiler sample conditioning equipment. These products are selected for fluid compatibility, operating reliability, and suitability across industrial fluid handling environments.
Multiple pump technologies — AODD, centrifugal, vertical, and peristaltic configurations
Chemical transfer options — suitable materials for acids, alkalis, solvents, and process liquids
Seal and seal-less designs — mechanical seal, magnetic-drive, and hose-based pumping options
Local engineering support — technical selection, commissioning, and after-sales
Type 01Self-priming positive displacement pumps capable of handling abrasive, viscous, and solids-laden fluids. Powered by compressed air for versatile industrial fluid transfer.
View Models
Type 02Seal-less centrifugal pumps designed for the safe transfer of corrosive chemicals. Magnetic coupling eliminates mechanical seals and reduces leakage risk.
View Models
Type 03Thermoplastic centrifugal pumps equipped with mechanical seals for chemical transfer applications. Suitable for continuous-duty industrial fluid handling.
View Models
Type 04Vertical immersion centrifugal pumps designed for installation in tanks, sumps, and process vessels. Suitable for transferring corrosive liquids from below-grade systems.
View Models
Type 05Positive displacement pumps that transfer fluid through a flexible hose or tube. Suitable for viscous, abrasive, and shear-sensitive liquids.
View Models
Type 06Non-chemical water conditioning devices that modify mineral crystal formation using magnetic fields. Installed directly onto piping systems without process interruption.
View Models
Type 07Engineered systems that cool and condition boiler water and steam samples prior to analysis. Used to prepare representative samples for accurate testing and monitoring.
View ModelsChemical compatibility charts give you a starting point. They do not tell you whether your specific system will fail. The chart says EPDM is compatible with 30% sulphuric acid —...
Centrifugal pump impellers come in three basic configurations. Closed impellers have two shrouds — one on each side of the vanes — creating enclosed flow passages with small internal clearances...
Standard conductivity measurement is one of the most common parameters in boiler feedwater and steam condensate monitoring. It is fast, inexpensive, and gives a useful general indication of total dissolved...
The hose in a peristaltic pump is the only consumable that matters. Everything else — the rotor, the casing, the drive — runs for years without replacement. The hose typically...
Air-operated double diaphragm pumps are valued for their simplicity and reliability. They have no mechanical seal, no close-tolerance impeller, and no lubrication requirement. In principle, they should be among the...
A cooling tower does one job well: it removes heat from a process by evaporating water. But evaporation is not neutral. As water vapour leaves, everything dissolved in it stays...
Our engineers are ready to evaluate your requirements and recommend the right solution.