Pyxis CR-300 Wired LPR Corrosion Sensor (1-inch MNPT)
Wired LPR corrosion sensor, 1-inch MNPT, 24V/2W powered. 4-20mA + RS-485 out, 8-pin.
Pyxis CR-300 Wired LPR Corrosion Sensor (1-inch MNPT)
The Pyxis CR-300 is a wired Linear Polarization Resistance (LPR) sensor for real-time corrosion rate monitoring in cooling water and process systems. It installs via a 1-inch MNPT thread, runs on 24V/2W power, and outputs data via 4-20mA analog and RS-485 through an 8-pin connector.
Description
The Pyxis CR-300 is a wired Linear Polarization Resistance (LPR) corrosion sensor for real-time corrosion rate monitoring in cooling water and process systems. It installs directly into piping via a 1-inch MNPT threaded connection, making it straightforward to fit into standard piping arrangements.
The sensor runs on 24V/2W power and outputs corrosion rate data via both 4-20mA analog and RS-485 through an 8-pin connector, allowing integration with existing plant monitoring and control infrastructure.
It is suited to facilities that want a permanently wired, continuously powered corrosion monitoring point on cooling water or process piping.
Why Use This
Real-Time Corrosion Monitoring
LPR sensing provides continuous corrosion rate data for cooling water and process systems.
Straightforward Installation
A 1-inch MNPT thread allows direct mounting into standard piping.
Applications
- Cooling water systems — continuous, wired corrosion rate monitoring
- Process piping systems — permanent installation via 1-inch MNPT threaded connection
FAQ
How does the CR-300 connect to piping?
It installs via a 1-inch MNPT threaded connection, fitting standard piping fittings.
What are the power requirements?
The CR-300 runs on 24V/2W power.
What does the CR-300 measure and how is data output?
It measures real-time corrosion rate using Linear Polarization Resistance (LPR) technology, with output via 4-20mA analog and RS-485 through an 8-pin connector.
Resources
Related Products
316L stainless steel inline fluorometer measuring PTSA (0–500ppb) and turbidity (0–200NTU) with colour and turbidity compensation. Rated to 290psi, suited to data centre and high-pressure cooling systems.
Stainless steel dechlorination sensor measuring Free Chlorine (0-5ppm) and Sulfite (0-100ppm) simultaneously, plus pH. Sensor only, no flow reservoir. Dual 4-20mA + RS-485.
Compact dual-channel controller for pH and ORP monitoring with direct pulse output to dosing pumps.
PVDF injection quill with integral non-return valve for safe chemical injection into pressurised pipelines.
Other Models in This Line
Latest Resources
Need help with selection or sizing?
Our engineers are ready to evaluate your requirements and recommend the right solution.