Stainless steel high-pressure inline fluorometer for sugar thin juice monitoring (0-500ppm). 4-20mA + RS-485, 7-pin.

The Pyxis HW-201 is an inline fluorometer built with a stainless steel body for high-pressure service, designed for sugar thin juice process monitoring. It covers a 0-500ppm range and outputs via both 4-20mA analog and RS-485 Modbus through a single 7-pin connector, supporting continuous in-process monitoring in sugar refining operations.
The Pyxis HW-201 is an inline fluorometer purpose-built for sugar thin juice process monitoring, covering a 0-500ppm range. It is constructed with a stainless steel body rated for high-pressure service, making it suitable for installation directly in sugar refining process lines.
The sensor outputs via both 4-20mA analog and RS-485 Modbus communication through a single 7-pin connector, allowing it to feed either analog control panels or networked PLC/SCADA systems used in refinery process control.
By measuring thin juice concentration continuously and inline, the HW-201 supports ongoing process monitoring in sugar refining operations without interrupting production for manual sampling.
The stainless steel body lets the HW-201 operate reliably in high-pressure thin juice process lines.
Covering 0-500ppm, the HW-201 gives sugar refining operations a continuous inline read on thin juice concentration for process control.
It measures sugar thin juice concentration over a 0-500ppm range.
Yes, it has a stainless steel body built for high-pressure service.
4-20mA analog and RS-485 Modbus outputs, through a single 7-pin connector.
It is designed for sugar refining operations requiring continuous inline thin juice process monitoring.
Stainless steel dechlorination sensor measuring Free Chlorine (0-5ppm) and Sulfite (0-100ppm) simultaneously, plus pH. Sensor only, no flow reservoir. Dual 4-20mA + RS-485.
Stainless steel chlorine dioxide + pH sensor, 0-5ppm, sensor only with no flow reservoir. Dual 4-20mA + RS-485, 8-pin connector.
Compact dual-channel controller for pH and ORP monitoring with direct pulse output to dosing pumps.
PVDF injection quill with integral non-return valve for safe chemical injection into pressurised pipelines.
Our engineers are ready to evaluate your requirements and recommend the right solution.