Skip to main content

Autoflo Technology

Pyxis ST-525SS-HR-T Inline Drop-In Stainless Steel High Range Fluorescein Sensor (requires ST-007 Tee)

Drop-in design stainless steel high-range fluorescein sensor (0-500ppb). Requires ST-007 stainless tee. 4-20mA + RS-485, 8-pin.

Pyxis
Inline Tracer Sensor
Chemical Dosing Tracking

Pyxis ST-525SS-HR-T Inline Drop-In Stainless Steel High Range Fluorescein Sensor (requires ST-007 Tee)

Model:
ST-525SS-HR-T
Brand:
Pyxis

The Pyxis ST-525SS-HR-T is an inline sensor that measures dye-tagged (fluorescein) treatment chemical dosing, supporting treatment chemical feed. It reports concentration across a 0-500ppb range and communicates via 4-20mA analog output and RS-485 Modbus through an 8-pin connector. Its stainless steel body is built for high-pressure process line installations. The drop-in design installs into the ST-007 stainless tee, sold separately, for straightforward field mounting.

Real-time tracer monitoring — 4-20mA analog and RS-485 Modbus outputs feed data directly into control systems
Drop-in stainless steel design — mounts into the ST-007 stainless tee (sold separately) for high-pressure, simplified installation
Real-time tracer monitoring — 4-20mA analog and RS-485 Modbus outputs feed data directly into control systems

Description

The Pyxis ST-525SS-HR-T is a drop-in, high-range fluorescein tracer sensor with a stainless steel body built for high-pressure process water applications. It measures dye-tagged treatment chemical dosing across a 0-500ppb range, suiting treatment programs that run at higher tracer concentrations.

As a drop-in design, it installs into the companion ST-007 stainless steel tee, sold separately, which simplifies field mounting and service access on high-pressure lines without disturbing the main process fitting. Data is transmitted via a 4-20mA analog signal and RS-485 Modbus through an 8-pin connector.

It is suited to treatment providers needing serviceable, high-concentration tracer monitoring on demanding, high-pressure boiler or process water systems.

Why Use This

Continuous tracer monitoring

Measures dye-tagged (fluorescein) treatment chemical dosing in real time across a 0-500ppb range, giving operators direct visibility into treatment chemical performance.

Easy control system integration

Dual 4-20mA analog and RS-485 Modbus outputs through an 8-pin connector let the sensor feed data straight into existing SCADA or controller setups.

Built for high-pressure lines

The stainless steel housing withstands high-pressure process water service where standard sensor bodies would not be suitable.

Applications

  • High-pressure, high-concentration tracer monitoring — combines stainless steel construction with 0-500ppb range
  • Serviceable drop-in installation — mounts into the ST-007 tee for easier maintenance access
  • Boiler and process water treatment programs — continuous dye-tagged chemical feed verification
  • Control system integration — 4-20mA and RS-485 Modbus outputs for automated monitoring

FAQ

Does this sensor require additional hardware to install?

Yes, the ST-525SS-HR-T is a drop-in sensor that requires the ST-007 stainless steel tee, sold separately, for mounting into the process line.

What range does it measure?

It covers a 0-500ppb range for dye-tagged fluorescein tracer, suited to higher-concentration treatment programs.

Is it built for high-pressure service?

Yes, its stainless steel construction is built for high-pressure process line installations.

How does it connect to control equipment?

It provides 4-20mA analog output and RS-485 Modbus communication through an 8-pin connector.

Download

D25 Product Datasheet
PDF · 1.2 MB
Installation Manual
PDF · 0.8 MB

Resources

How to Size a Chemical Dosing Pump for Water Treatment
Technical Article · 8 min read
Understanding Water-Powered vs Electric Dosing Pumps
Technical Article · 6 min read
Poultry Medication Dosing — Case Study
Case Study · Selangor Poultry Farm
You May Also Need

Related Products

Pyxis RT-200 PRISM High Temperature Inline Refractometer

High-temperature inline digital refractometer measuring refractive index, %BRIX, and glycol concentration up to 120°C. Stainless steel Tri-Clamp body, IP67, built-in Bluetooth 5.0.

Pyxis ST-765SS-CLO Chlorine Dioxide + pH Sensor – Sensor Only (Stainless Steel)

Stainless steel chlorine dioxide + pH sensor, 0-5ppm, sensor only with no flow reservoir. Dual 4-20mA + RS-485, 8-pin connector.

Controllers
Pyxis pH / ORP Controller

Compact dual-channel controller for pH and ORP monitoring with direct pulse output to dosing pumps.

Accessories
Injection Quill & Check Valve

PVDF injection quill with integral non-return valve for safe chemical injection into pressurised pipelines.

Animal Line

Other Models in This Line

Pyxis ST-525SS-HR-T Inline Drop-In Stainless Steel High Range Fluorescein Sensor (requires ST-007 Tee)
Explore Range
Stay Informed

Latest Resources

Initiate a Project

Need help with selection or sizing?

Our engineers are ready to evaluate your requirements and recommend the right solution.