Pyxis ST-772 Luminescent Dissolved Oxygen Sensor
Optical/luminescent dissolved oxygen sensor, standard body, no membrane replacement or electrolyte refill needed. Isolated 4-20mA + RS-485.
Pyxis ST-772 Luminescent Dissolved Oxygen Sensor
The Pyxis ST-772 uses luminescent (optical) dissolved oxygen detection, avoiding the membrane replacement and electrolyte refill required by older galvanic and polarographic DO sensors. This standard-body variant is suited to process and wastewater dissolved oxygen monitoring. Isolated 4-20mA analog and RS-485 Modbus outputs support direct integration with a PLC, SCADA, or third-party controller.
Description
The Pyxis ST-772 uses luminescent (optical) dissolved oxygen detection, avoiding the membrane replacement and electrolyte refill required by older galvanic and polarographic DO sensors. This standard-body variant is suited to process and wastewater dissolved oxygen monitoring.
Because it relies on optical rather than chemical detection, the sensor removes a recurring maintenance task from DO monitoring programmes, letting operators focus on readings rather than consumable replacement.
Isolated 4-20mA analog and RS-485 Modbus outputs support direct integration with a PLC, SCADA, or third-party controller.
Why Use This
Lower maintenance dissolved oxygen monitoring
Luminescent optical detection eliminates the membrane replacement and electrolyte refill needed by older galvanic and polarographic DO sensors.
Straightforward controller integration
Isolated 4-20mA analog and RS-485 Modbus outputs connect directly to a PLC, SCADA, or third-party controller.
Applications
- Process water dissolved oxygen monitoring — continuous optical DO tracking
- Wastewater treatment monitoring — DO measurement without membrane or electrolyte maintenance
FAQ
How does this DO sensor differ from a galvanic or polarographic sensor?
It uses luminescent (optical) dissolved oxygen detection, avoiding the membrane replacement and electrolyte refill required by older galvanic and polarographic DO sensors.
What applications is it suited to?
Process and wastewater dissolved oxygen monitoring, in a standard sensor body configuration.
How does it integrate with a control system?
Via isolated 4-20mA analog and RS-485 Modbus outputs, for direct integration with a PLC, SCADA, or third-party controller.
Resources
Related Products
Stainless steel bromine + pH sensor, 0-5ppm, sensor only with no flow reservoir. Dual 4-20mA + RS-485, 8-pin connector.
Real-time inline PTSA sensor for tracking inhibitor dose in cooling and boiler water treatment programmes. Measures PTSA using fluorescence technology across 0–300ppb with automatic colour and turbidity compensation, holding accuracy even in samples with iron contamination or elevated turbidity.
Compact dual-channel controller for pH and ORP monitoring with direct pulse output to dosing pumps.
PVDF injection quill with integral non-return valve for safe chemical injection into pressurised pipelines.
Other Models in This Line
Latest Resources
Need help with selection or sizing?
Our engineers are ready to evaluate your requirements and recommend the right solution.