Pyxis ST-765SS-TCL Total Chlorine + pH Sensor – Sensor Only (Stainless Steel)
Stainless steel total chlorine + pH sensor, 0-5ppm, sensor only with no flow reservoir. Dual 4-20mA + RS-485, 8-pin connector.
Pyxis ST-765SS-TCL Total Chlorine + pH Sensor – Sensor Only (Stainless Steel)
The Pyxis ST-765SS-TCL is a stainless steel, membrane-less multi-parameter sensor that measures total chlorine, pH, and temperature in a single probe using Pyxis Lab's bare-gold electrochemical detection technology. It ships sensor-only, without a flow reservoir kit, for installation into an existing housing. Dual isolated 4-20mA outputs plus RS-485 Modbus support direct integration with a PLC, SCADA, or third-party controller.
Description
The Pyxis ST-765SS-TCL is a stainless steel, membrane-less multi-parameter sensor that measures total chlorine, pH, and temperature from a single probe, using Pyxis Lab’s bare-gold electrochemical detection technology. It ships sensor-only, without a flow reservoir kit, for installation into an existing housing.
Total chlorine is measured over a 0-5ppm range. The reference electrode assembly is replaceable and front-loading, reducing startup polarisation time and giving a typical service life of up to 2 years, which reduces maintenance frequency.
Dual isolated 4-20mA outputs plus RS-485 Modbus, via an 8-pin connector, allow the sensor to integrate directly with a PLC, SCADA system, or third-party controller.
Why Use This
Total chlorine monitoring in one probe
Measures total chlorine, pH, and temperature simultaneously, reducing the number of separate sensors needed in a control loop.
Reduced maintenance
The replaceable, front-loading reference electrode typically lasts up to 2 years and cuts startup polarisation time.
Flexible controller integration
Dual isolated 4-20mA outputs and RS-485 Modbus connect directly to a PLC, SCADA, or third-party controller via an 8-pin connector.
Applications
- Total chlorine disinfection monitoring — tracks total chlorine and pH together in treated water
- Industrial process water treatment — bare-gold electrochemical sensing for continuous inline monitoring
- PLC/SCADA-integrated control loops — dual 4-20mA and RS-485 Modbus outputs feed directly into existing control systems
FAQ
Does this sensor come with a flow reservoir or housing?
No. The ST-765SS-TCL ships sensor-only, with no flow reservoir kit included, for installation into an existing housing.
What is the total chlorine measurement range?
The sensor measures total chlorine over a 0-5ppm range, alongside pH and temperature.
What is the electrode service life?
The reference electrode assembly is replaceable and front-loading, with a typical service life of up to 2 years.
How does it connect to a control system?
Via dual isolated 4-20mA outputs plus RS-485 Modbus over an 8-pin connector, for direct integration with a PLC, SCADA, or third-party controller.
Resources
Related Products
Inline conductivity sensor rated for high temperature and high pressure service, suited to boiler feedwater and steam condensate monitoring.
Real-time inline PTSA sensor for tracking inhibitor dose in cooling and boiler water treatment programmes. Measures PTSA using fluorescence technology across 0–300ppb with automatic colour and turbidity compensation, holding accuracy even in samples with iron contamination or elevated turbidity.
Compact dual-channel controller for pH and ORP monitoring with direct pulse output to dosing pumps.
PVDF injection quill with integral non-return valve for safe chemical injection into pressurised pipelines.
Other Models in This Line
Latest Resources
Need help with selection or sizing?
Our engineers are ready to evaluate your requirements and recommend the right solution.