Why Your pH Reading Keeps Drifting: The Reference Electrode Problem Nobody Talks About
Every time a pH reading drifts, the glass bulb gets blamed. The operator recalibrates, the drift comes back within days, and eventually someone replaces the whole sensor. Nine times out of ten, the glass electrode was never the problem — a pattern we see repeatedly across process plants in Malaysia. The reference electrode is. Across […]
Why 90% of pH Sensor Failures Come from the Reference Cell — and How the LECOL B65 Fixes This
The glass membrane of a pH sensor rarely fails. Under normal operating conditions, a good pH glass membrane will last 2–5 years before its sensitivity degrades below useful limits. The reference cell, on the other hand, fails constantly — and in contaminated, hard, or chemically aggressive water, it fails quickly. Industry data on pH sensor […]
Why Standard pH Sensors Fail in Ultrapure Water — and What the LECOL B64 Does Differently
A standard pH sensor placed in ultrapure water does not measure the pH of the water. It measures a drifting, unstable number that is influenced by the sensor’s own reference cell leaching ions into the sample, by CO₂ absorption at the liquid junction, and by the extremely low ionic strength of the water itself. The […]
What Happens When You Run a Boiler Monitoring System Without a Sample Cooler
Every boiler feedwater and steam condensate analyser on the market — including the Pyxis Guardian IK-2000 series — specifies that it must be installed downstream of a sample cooler. This requirement is stated prominently in the installation documentation, with operating temperature limits of 40–49°C at the sensor inlet. In practice, sample coolers are frequently omitted […]
Why Cation Conductivity Tells You More Than Standard Conductivity in a Boiler System
Standard conductivity measurement is one of the most common parameters in boiler feedwater and steam condensate monitoring. It is fast, inexpensive, and gives a useful general indication of total dissolved solids. But in power generation and co-generation applications, standard conductivity has a significant limitation: it cannot reliably distinguish between contaminants that are genuinely corrosive and […]
Why Real-Time Boiler Water Quality Monitoring Is Not Optional — Conductivity, pH, Dissolved Oxygen, and Hardness Explained
A boiler that runs on poor-quality feedwater does not announce the problem immediately. The damage accumulates quietly — inside heat transfer surfaces, in the steam distribution system, at turbine blades — until it manifests as a tube failure, a forced shutdown, or an efficiency decline that has been building for months. The four parameters that […]